Description
*Requires SEN5A/CT to commission sensor - Get it here
Operating Temp Range |
-20° C (-4° F) to 60° C (140° F) |
Approvals |
ETL/cETL |
LED Accessory |
Yes |
POWER SUPPLY |
12V-24V DC, >30MA |
DIM CONTROL OUTPUT |
0-10V, MAX. 25MA SINKING CURRENT |
HF SYSTEM |
5.8GHz ± 75MHz |
TRANSMISSION POWER |
<0.2mW |
DETECTION RADIUS |
20%/50%/75%/100% (1-8M) |
MOUNTING HEIGHT |
12M |
TIME SETTING |
10S/1MIN/5MIN/10MIN/15MIN/20MIN/30MIN/60MIN |
LIGHT-CONTROL |
24H/10LUX/30LUX/50LUX |
IP RATIO |
IP65 |
SPEC SHEET |
- NOTE: WARM UP TIME IS 15 SECONDS. AFTER THE SENSOR CONNECTS INPUT POWER FIRST TIME, THE LIGHT WILL KEEP ON 15 SECONDS, THEN GO TO DIMMING TO WORK NORMALLY.
- NOTE: FACTORY DEFAULT SETTING: 100% SENSITIVITY, HOLD ON TIME: 5 MIN, DAYLIGHT SENSOR IS , DIMMING LEVEL: 30%, DIMMING TIME: 60 MINUTES.
- NOTE: ANY SETTING CHANGED BY THE REMOTE CONTROL WILL BE SIGNALED BY THE LED LIGHT THAT SENSOR IS CONNECTED TO WILL FLASH ON/OFF